1. Medical protective mask: It complies with Chinese GB 19083-2010 mandatory standards, and the filtration efficiency is ≥95% (using non-oily particulate matter test). It is required to pass the synthetic blood penetration test (to prevent splashing of body fluids) and to meet the microbiological indicators.
2. N95 mask: American NIOSH certification, non-oily particulate filtering efficiency ≥95%.
3. KN95 mask: It complies with Chinese GB 2626 mandatory standards, and the filtration efficiency of non-oily particulate matter is ≥95%. The test methods for the filtration efficiency of the above three grade masks are exactly the same! So the filtration efficiency level is the same.
4.
The core standards of industrial masks and consumer masks are the same.
KN95 according to the GB2626 standard is enough. KN90 is actually enough.
Medical personnel can only splash body fluids.
It is only necessary to be strict when the environmental concentration is high.
However, it should be noted that some star masks of the same style are beautiful,
but regardless of the protective effect.
"The above 3M technicians told the 21st Century Business Herald reporter
Points to note when wearing a mask:
1. Wash your hands before wearing a mask, or avoid touching your hands with the inside of the mask while wearing the mask to reduce the possibility of the mask being contaminated.
2. Distinguish the inside and outside of the mask, up and down, the light side is inside, it should be close to the mouth and nose, the dark side is facing outward; the one end of the metal strip is above the mask.
3. Never squeeze the mask by hand, including the N95 mask, you can only isolate the virus on the surface of the mask. If you squeeze the mask by hand, the virus will wet the mask with the droplets, there is still a chance of infection.
4. Make sure that the mask and the face have a good adhesion. The simple test method is: after putting on the mask, exhale hard, and the air cannot leak out from the edge of the mask.
