banner
Home » News » Content
Product Categories
Contact Us

Hangzhou FY Textile Digital Printing Co., Ltd
Add: 4th Floor Gaoshida, Xinhua Village, Ningwei Town, Xiaoshan District, Hangzhou, Zhejiang, China
Contact us: Solar Bao
Tel: +86-571-88919810
Fax: +86-571-88919810
Mobile: +86-18042013040
E-mail: bruce@hzfengyin.com

Printing Process In Textile Industry

- Jul 10, 2018 -

   Textile fabric printing is part of the textile finishing industry. In fabric printing, a decorative pattern or design is applied to constructed fabric by roller, flat screen, or rotary screen methods. Pollutants of interest in fabric printing are volatile organic compounds (VOC) from mineral spirit solvents in print pastes or inks. Tables 4.11-1, 4.11-2, and 4.11-3 show typical printing run characteristics and VOC emission sources, respectively, for roller, flat screen, and rotary screen printing methods. 

  In the roller printing process, print paste is applied to an engraved roller, and the fabric is guided between it and a central cylinder. The pressure of the roller and central cylinder forces the print paste into the fabric. Because of the high quality it can achieve, roller printing is the most appealing method for printing designer and fashion apparel fabrics. 

  In flat screen printing, a screen on which print paste has been applied is lowered onto a section of fabric. A squeegee then moves across the screen, forcing the print paste through the screen and into the fabric. Flat screen machines are used mostly in printing terry towels. 

    In rotary screen printing, tubular screens rotate at the same velocity as the fabric. Print paste distributed inside the tubular screen is forced into the fabric as it is pressed between the screen and a printing blanket (a continuous rubber belt). Rotary screen printing machines are used mostly but not exclusively for bottom weight apparel fabrics or fabric not for apparel use. Host knit fabric is printed by the rotary screen method, because it does not stress (pull or stretch) the fabric during the process.

    Major print paste components include clear and color concentrates, a solvent, and in pigment printing, a low crock or binder resin. Print paste color concentrates contain either pigments or dyes. Pigments are insoluble particles physically bound to fabrics. Dyes are in solutions applied to impart color by becoming chemically or physically incorporated into individual fibers. Organic solvents are used almost exclusively with pigments. Very little organic solvent is used in nonpigment print pastes. Clear concentrates extend color concentrates to create light and dark shades. Clear and color concentrates do contain some VOC but contribute less than 1 percent of total VOC emissions from textile printing operations. Defoamers and resins are included in print paste to increase color fastness. A small amount of thickening agent is also added to each print paste to control print paste viscosity. Print defoamers, resins, and thickening agents do not contain VOC. 

   The majority of emissions from print paste are from the solvent, which may be aqueous, organic (mineral spirits), or both. The organic solvent concentration in print pastes may vary from 0 to 60 weight percent, with no consistent ratio of organic solvent to water. Mineral spirits used in print pastes vary widely in physical and chemical properties (see Table 4.11-4).

    Although some mineral spirits evaporate in the early stages of the printing process, the majority of emissions to the atmosphere is from the printed fabric drying process, which drives off volatile compounds (see Tables 4.11-2 and 4.11-3 for typical VOC emission splits). For some specific print paste/fabric combinations, color fixing occurs in a curing process, which may be entirely separate or merely a separate segment of the drying process.


Fabric Printing Process.jpg

Hangzhou FY Textile Digital Printing Co., Ltd

Add: 4th Floor Gaoshida, Xinhua Village, Ningwei Town, Xiaoshan District, Hangzhou, Zhejiang, China

Contact us: Solar Bao

Tel: +86-571-88919810

Fax: +86-571-88919810

Mobile: +86-18042013040

E-mail: bruce@hzfengyin.com